 | 2000 MicroFlow Sensor
The Signet 2000 MicroFlow Sensor is constructed from PPS which provides high material strength. The 2000 offers two flow ranges starting at 0.03 or 0.7 gpm, for clean process liquids, regardless of fluid color or opacity. This sensor can be connected to flexible tubing or rigid pipe, and uses standard hardware for mounting. Only one moving part and a low pressure drop across the sensor reduces operating costs and maintenance requirements.
2000 Data Sheet
Flow Instrumentation
8900 Multi-Parameter Controller
Flow Monitors/Controllers
|
 | 2100 Turbine Flow Sensor
Engineered specifically for 16px diameter applications, the Signet 2100 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.1 to 1 gpm and 0.8 to 10 gpm. The injection-molded PVDF body and ceramic bearings provide excellent chemical compatibility and long service in dosing and batching applications. The 2100 can be used with 1/4", 3/8" or 1/2" tubing, or 1/2" piping for installation flexibility. End connections are available in PVDF for hose barbs, flare ends, fusion socket or IR/butt fusion, and in PVC for socket or NPT thread.
2100 Data Sheet
Flow Instrumentation
8900 Multi-Parameter Controller
Flow Monitors/Controllers
|
 | 2507 Mini Flow Sensor
The Signet 2507 Mini Flow Sensor contains a free-running rotor that is driven by the fluid flow. Within the given measurement range, the rotational speed of the rotor is proportional to the fluid flow rate. Permanent magnets built into the rotor actuate an electronic switch in the top of the sensor generating a square-wave output signal proportional to flow rate. Both opaque and transparent fluids can be measured from 0.2 to 20.0 centistokes.
2507 Data Sheet
Flow Instrumentation
8900 Multi-Parameter Controller
Flow Monitors/Controllers
|